TROX MFCA – Filter Cartridges

Call for Price

Compact construction for special applications

Final filters for the separation of suspended particles to meet the highest requirements

Filter classes E11, H13
Performance tested in accordance with EN 1822-1 and ISO 29463-2 to ISO 29463-5
Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
Low initial differential pressure due to ideal pleat position and largest possible filter area
Meets the hygiene requirements of VDI 6022

Category: Minipleat Filters Tag: MFCA

Introduction

Application

Mini Pleat filter cartridges type MFCA for the separation of suspended particles such as aerosols, toxic dusts, viruses, bacteria from the supply and extract air in ventilation systems.
Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

Leakage test, standard for all particulate filters of filter class H13

Nominal sizes

D × H [in]

Description

Filter classes

Filter groups

EPA according to EN 1822
HEPA according to EN 1822

Filter classes
• E11
• H13

Construction

AL: Casing made of aluminium

Construction features

Cylindrical design
Casing made of perforated sheet metal, aluminium
As standard, the filter cartridge is fitted with a continuous seal on the upstream side

Materials and surfaces

Filter media made of high-quality, moisture-resistant glass fibre papers, pleated

Spacers provide a uniform spacing of the pleats
Joint sealing compound made of permanently elastic two-component polyurethane adhesive
Casing made of aluminium

Standards and guidelines

Testing of particulate filters to EN 1822 (EPA, HEPA and ULPA filters): European standard for the testing of filtration performance in the factory, particle counting method using a liquid test aerosol
Uniform classification of particulate filters according to efficiency, using a test aerosol whose average particle size lies within the minimum efficiency (MPPS)
Particulate filters are classified according to the values determined for the local filtration efficiency and the overall filtration efficiency as EPA (filter classes E10, E11, E12), HEPA (filter classes H13, H14) or ULPA (filter classes U15, U16, U17)

Specification Text

Specification text

Mini Pleat filter cartridges MFCA for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. Use as particulate filters, i.e. main or final filters, for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering. The filter media are made of high-quality, moisture-resistant glass fibre papers, with spacers made of thermoplastic hot-melt adhesive. Low initial differential pressure due to ideal pleat position and largest possible filter area. Mini Pleat filter cartridges are available in standard sizes, filter classes E11, H13. As standard, Mini Pleat filter cartridges are fitted with a continuous seal. Hygiene conformity in accordance with VDI 6022.

Special characteristics

Leakage test, standard for all particulate filters of filter class H13

Materials and surfaces

Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
Spacers provide a uniform spacing of the pleats
Joint sealing compound made of permanently elastic two-component polyurethane adhesive
Casing made of aluminium

Materials and surfaces