880TA60110C21 Bryant Evolution 80% AFUE 110000 Btuh Variable Speed 4-Way Mulitpoise Induced Combustion Gas Furnace

$3,298.14

E:Mail: sales@walkair.us to confirm availability or for volume discounts

SKU: 880TA60110C21 Category: Tag:

Description

880TA60110C21 Bryant Evolution 80% AFUE 110000 Btuh Variable Speed 4-Way Mulitpoise Induced Combustion Gas Furnace – E:Mail: sales@walkair.us to confirm availability or for volume discounts

The Two-stage, Variable-speed, 4-way Multipoise Gas Furnace offers outstanding comfort in an 80% AFUE furnace.
You get the benefits of Perfect Heat®: reduced drafts, reduced sound levels, longer cycles, less temperature swings between cycles, less temperature differences between rooms, and improved indoor air quality. Plus, it features a dehumidify mode and the ability to change continuous fan speeds from the thermostat. The 880TA/881TA furnaces are approved for use with natural or propane gas. 881TA – Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

Bryant Evolution® System When the Evolution 80 variable-speed gas furnace is matched with the Evolution Control and an air conditioner or heat pump, you will experience the ultimate in Perfect Heat and Perfect Humidity through unparalleled control of temperature, humidity, indoor air quality, and zoning.
The Bryant Evolution System also provides unprecedented ease of use through on-screen, text-based service reminders and equipment malfunction alerts. For even greater comfort and convenience, match the Evolution 80 furnace with an Evolution air conditioner or heat pump. This will create a fully communicating system, requiring only 4 thermostat wires between system components, and troubleshooting can even be done from the outdoor unit without entering the home.

PERFORMANCE

  • Variable-speed ECM blower motor
    • – Increased SEER ratings for AC and HP systems as compared to the Air Conditioning Heating and Refrigeration Institute’s standard coil-only rating when paired with selected Bryant evaporator coils.
    • – Perfectly matches CFM to cooling system at all static points
  • Perfect Heat® operation
  • – Two-stage heating even with single-stage thermostat-patented
  • – Adaptive Control Technology
  • – Reduced operating sound through low-stage operation and sound elimination combustion system
  • Very low operating sound through low-stage operation and QuieTech™ system
  • SmartEvap™ can lower the humidity level in the home by nearly 10 percent
  • Perfect Light™ Igniter
  • Microprocessor based control center
  • – Enhanced diagnostics with LED and reflective sight glass
  • – Stores fault codes during power outages
  • – Adjustable heating air temperature rise
  • – Adjustable cooling airflow
  • – Dehumidification selection for summer-time cooling
  • Draft Safeguard switch to ensure proper furnace venting
  • Insulated blower compartment
  • Inner door for tighter sealing

INSTALLATION FLEXIBILITY

  • 4-way Multipoise furnace, 13 vent applications
  • Compact design – only 33-1/3 in. (847 mm) tall

APPLICATIONS

  • HYBRID HEAT® Dual Fuel System compatible
  • All models are chimney friendly when used with accessory vent kit
  • Two-stage heating with single-stage thermostat with patented Adaptive Control Technology

CERTIFICATION

  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
Attributes
AFUE 80
Air Flow Direction Multi-Position
BTU Input 72,500-110,000
BTU Output 59,000-89,000
Blower Motor HP 1
Blower Motor RPM 1,200
Blower Motor Speeds Variable
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel Diameter 11″
Blower Wheel Width 10″
Brand Bryant®
CFM 1,295-1,465
CFM Heating 1,295-1,465
Cabinet Width 21
Color Gray
Country of Origin USA
Cubic Measurement 11.7477
Cycle/Hertz 60 Hz
Energy Star Rated No
FER Compliant Yes
Filter Size 20″ x 25″ x 3/4″ (Bottom), 16″ x 25″ x 3/4″ (Side)
Fuel Type Natural Gas or LP
Full Load Amps 12.8
Furnace Type Gas
Gas Connection Size 1/2″
Gas Connection Type NPT
Ignition Type Hot Surface (HSI)
Includes Filter Rack No
Maximum Overcurrent Protection (MOCP) 20
OPT Code 1P880TA60110C21
Phase Single
Product Family 880TA
Prop 65 Yes
Stages Heating (2) Two
UOM EA
UPC See Optical
Voltage 115 VAC

Additional information

Weight 156 lbs
Dimensions 29 × 21 × 33.3333 in