TROX TVE-160-D2-Easy – 6″ Circular Variable Air Volume Terminal for low airflow velocities, in unfavorable upstream conditions, with Easy Controller

Call for Price

E:Mail: [email protected] to confirm availability or for volume discounts

SKU: TVE-160-D2-Easy Category: Tag:

Description

COMPACT VAV SOLUTION FOR LOW AIRFLOW VELOCITIES

Circular air terminal units for variable air volume systems with low airflow velocities, suitable even with unfavorable upstream conditions

  • Effective pressure measurement not with a tube, but by means of the damper blade
  • Effective pressure transmission through effective pressure channel in the shaft
  • Terminals with protective cover – no junction box required
  • Any airflow direction if dynamic transducer is used
  • Suitable for airflow velocities of 100 – 2550 ft/min
  • Compact dimensions allow for use in restricted spaces
  • Plug-and-play solution in conjunction with X-AIRCONTROL room control
  • Exact measurement even with low airflow velocities
  • Any installation orientation even with static transducer
  • Closed blade air leakage to EN 1751, at least class 3
  • Casing air leakage to EN 1751, class C
  • Volume flow rate range 1:25

Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer CA (for Germany and Switzerland), CAH (for EMEA) or CF, for the reduction of air-regenerated noise
  • Hot water heat exchanger WL and electric air heater EL for reheating the airflow

Application

  • Circular VAV terminal units for use in ventilation and air conditioning systems
  • For virtually all control, inductor and shut-off tasks in the supply air or extract air area
  • Also for unfavorable upstream conditions at low airflow velocities
  • Closed-loop volume flow control using an external power supply
  • For variable or constant volume flow systems
  • Shut-off via override control by others

Special features

  • High effective pressure signal at a small angle of attack
  • Factory set-up or programming and aerodynamic function testing
  • Volume flow rate can be measured and subsequently adjusted on site; additional adjustment tool may be necessary (depending on the variant of the control component)
  • Effective pressure monitoring tubeless via damper blade
  • Effective pressure transmission through effective pressure channel in shaft
  • Any direction of flow with dynamic transducer
  • Any installation orientation, even with static transducers
  • Suitable for airflow velocity of 100 – 2550 ft/min
  • Compact dimensions for use in confined ceiling areas

Nominal Sizes

  • 4″, 5″, 6″, 8″, 10″, 12″, 16″

Variants

  • TVE: VAV terminal unit
  • TVE-D: VAV terminal unit with acoustic cladding
  • TVE-FL: VAV terminal unit with flanges on both ends
  • TVE-D-FL: VAV terminal unit with acoustic cladding and flanges on both ends
  • Units with acoustic cladding and/or a secondary silencer CA (for Germany and Switzerland), CH (for EMEA) or CF for demanding acoustic requirements

Construction

  • Galvanized sheet steel

Parts and characteristics

  • Ready-to-commission unit which consists of mechanical parts and control components.
  • Damper blade with integrated measuring unit
  • Shaft with effective pressure channel for measured value transmission
  • Factory-assembled control components complete with wiring
  • Aerodynamic functional testing on a special test rig prior to shipping of each unit
  • Set-up data is given on a label or volume flow rate scale affixed to the unit
  • High control accuracy, even in unfavorable upstream conditions

Attachments

  • EASY controller: Compact unit consisting of controller with potentiometers, effective pressure transducer and actuator

Accessories

  • D2: Double lip seals on both ends (factory fitted)

Useful additions

  • Secondary silencer CA (for Germany and Switzerland), CAH (for EMEA) or CF
  • Heat exchanger WL
  • Electric air heater EL

Construction features

  • Circular casing
  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigots with groove for seal
  • Position of the damper blade indicated externally at position indicator
  • Control component can be replaced

Materials and surfaces

Galvanized sheet steel

  • Casing made of galvanized sheet steel
  • Damper blade, effective pressure sensor and shaft made of plastic, PA6, UL94, flame retardant (V-0)
  • Damper blade seal made of plastic, TPU, antimicrobial
  • Plastic plain bearings

Mineral wool

  • To EN 13501, fire rating Class A1, non-combustible
  • RAL quality mark RAL-GZ 388
  • Non-hazardous to health thanks to being highly biosoluble in accordance with the Ordinance on Hazardous Substances and Note Q of the European Directive (EC) No. 1272/2008

Standards and guidelines

Fulfils the hygiene requirements of

  • EN 16798, Part 3
  • VDI 6022, Sheet 1
  • DIN 1946, Part 4
  • For other applicable standards and guidelines refer to the hygiene certificate

Casing leakage

  • EN 1751, Class C

Closed blade air leakage:

NS 100 – 160

  • EN 1751, Class 3
  • Meets the general requirements of DIN 1946, part 4, with regard to the acceptable closed blade air leakage

NS 200 – 400

  • EN 1751, Class 4
  • Meets the increased requirements of DIN 1946, part 4, with regard to the acceptable closed blade air leakage

Maintenance

  • Maintenance-free as construction and materials are not subject to wear

Literature

 

Related products